Real-world applications of Moorfield products in science
Transition metal oxide nanostructures
Paper Abstract
The synthesis of transition metal oxide nanostructures, thanks to their high surface-to-volume ratio and the resulting large fraction of surface atoms with high catalytic activity, is of prime importance for the development of new sensors and catalytic materials. Here, we report an economical, time-efficient, and easily scalable method of fabricating nanowires composed of vanadium, chromium, manganese, iron, and cobalt oxides by employing simultaneous block copolymer (BCP) self-assembly and selective sequestration of metal–organic acetylacetonate complexes within one of the BCP blocks. We discuss the mechanism and the primary factors that are responsible for the sequestration and conformal replication of the BCP template by the inorganic material that is obtained after the polymer template is removed. X-ray photoelectron spectroscopy (XPS) and powder X-ray diffraction (PXRD) studies indicate that the metal oxidation state in the nanowires produced by plasma ashing the BCP template closely matches that of the precursor complex and that their structure is amorphous, thus requiring high-temperature annealing in order to sinter them into a crystalline form. Finally, we demonstrate how the developed nanowire array fabrication scheme can be used to rapidly pattern a multilayered iron oxide nanomesh, which we then used to construct a prototype volatile organic compound sensor.
How Moorfield products helped:
Gold electrode deposition by thermal evaporation
Six interdigitated electrodes (400 μm long by 100 μm wide with a 50 μm gap) were patterned in a positive photoresist (AZ 1514H, Microchemicals GmbH) using a maskless laser writing method and washed with a developer (AZ 726 MIF, Microchemicals GmbH). After evaporation of the 70 nm thick Au electrodes (nanoPVD-T15A, Moorfield Nanotechnology), the undeveloped resist was removed by liftoff using 1-methyl-2-pyrrolidone (99.5%, anhydrous; Sigma-Aldrich) at 40 °C. Finally, the organic residues were removed by being immersed in acetone with mild sonic agitation and then rinsed with ultrapure water.