News

Knowledge base

Magnetron sputtering
Magnetron sputtering
Magnetron sputtering is a versatile technique suited to a wide range of materials – and provides excellent coating-substrate adhesion….

Knowledge base

Physical Vapour Deposition
Low temperature evaporation

Knowledge base

Thermal evaporation
Thermal evaporation
Thermal evaporation is the most straightforward physical vapour deposition (PVD) technique, in terms of both mechanism and system configuration. The method is suitable for depositing a range of materials, primarily metals. …

Knowledge base

E-Beam featured
Electron-beam evaporation
Like all evaporative physical vapour deposition (PVD) methods, electron-beam evaporation (also known as e-beam evaporation) involves heating a material under vacuum conditions (typically in the 10-7 mbar region, or lower). This in-turn releases a vapour that moves up through a process chamber and coats a substrate at the top….
New nanoPVD-S10A video
New Overview Video for our Physical Vapour Deposition (PVD) System…
Ultra High Vacuum
MBE vacuum chambers completed and delivered
Moorfield have supplied and manufactured two UHV chambers which will form the core of a new system in the Surface, Interface & Thin Film Group at Warwick University…
Featured: Straight to the source
Moorfield stock a range of high-vacuum magnetron sputtering heads for industry-standard diameter targets….
On the road again
This June, Moorfield will be touring the Benelux territories with local representative ST Instruments. In the back of the van will be a working nanoPVD-S10A system!…
Our team is growing
New Staff To Meet Growing Demand…
Edwards e306 spares
e306 spares and components
Do you have an Edwards e306? They’re old systems, but Moorfield can support them!…
Vacuum support to the print industry
Moorfield supply and repair pumps for the print industry as well as providing spare parts and kits for many makes and models of pumps…
A high speed PE-ALD ZnO Schottky diode rectifier with low interface-state density

Thank you for signing up